MOSAIC TILE FIBERGLASS MESH You pick length (ft) x 37"
SKU: MESH
DIRECTIONS
Place your mesh on a flat surface on top of your pattern, if you have one. It's a good idea to place a piece of clear plastic between the mesh and the surface/pattern beneath it because a little bit of glue will drip through. Use Weldbond Glue to place a small drop of glue on the back of each tile, and stick it directly to the mesh.
Allow 24-48 hours for the glue to dry before moving. Trim stray edges, pull off any plastic that may have stuck to the backside of your mesh, prepare your mosaic surface with adhesive and then stick the entire piece in place.
The mesh is 37 1/2" wide and the price is per linear foot. We have a large quantity available, and whatever length you order will be sent to you in one continuous sheet. So for a purchase quantity of 1, you will receive a piece measuring 12" x 37.5". If you order a quantity of 10, you will receive a sheet that is 10' x 37.5".
